In contrast to conventional MIG/TIG welding, the laser device enables us to reach an incomparable quality of the weld itself and of the welded part’s surface. As we weld sheets with a thickness of 0.6 mm, the benefits are apparent in terms of both quality and quantity. Within an average of 2.5 minutes, we are able to prepare the CLASSIC ASN welded housing with no need to perform additional abrasion operations. In addition, the part is ready immediately for surface treatment. Since laser beams are extremely dangerous to the human eye, the entire welding process takes place in an enclosed cell where only the six-axis welding robot is located. The laser device is located outside and the beam runs through an optical cable directly to the welding robot, which points the beam in the welding head (a set of lenses) to be focused as required.